Big Boyz Head Porting  


How to splice and solder wires so they will hold.

1) Strip wires to be spliced together about 3/4" (picture 1)
2) Cross wires (picture 2) and twist them (picture 3)
3) Solder wires starting in middle to minimize insulation melting (picture 4)
4) Make sure entire connection is soldered (picture 5)
5) Cover entire joint with heat shrink tubing overlapping wire about 1/2" (picture 6)

Don't solder wires without twisting them together. As shown in the pictures below, they pull apart very easy and will not hold up over time.

** Terms Of Use **

Powered by vBulletin® Version 3.6.8
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
(C)2000-2024 Big Boyz Head Porting
vB Ad Management by =RedTyger=

hit counter html code
hit counter javascript